|
|
| Item |
Part No. |
Specifications |
| Straight shank |
SLSK |
Straight shank 10mm (3/8") |
| SDS shank |
SLSKR |
SDS shank (Light-weight hammer drill) |
Shank (6.35mm Hex)
(DIN 3126,ISO1173 Style E6.3) |
SLSKJDE |
Shank for cordless impact driver (6.35mm Hex)
(For cutter size of 35mm (1-3/8") or less) |
|
| * |
The shank for cordless drill can be used with cutters of up to 35mm (1-3/8") in diameter. |
| * |
The plug ejector is included. |
| Item |
Part No. |
Specifications |
| Straight shank |
SLSK578 |
Straight shank 10mm (3/8") |
| SDS shank |
SLSKR578 |
SDS shank (Light-weight hammer drill) |
|
| * |
The plug ejector is included. |
| Item |
Part No. |
Specifications |
| Straight shank |
SLSKH |
Straight shank 10mm (3/8") |
| SDS shank |
SLSKHR |
SDS shank (Light-weight hammer drill) |
|
| * |
The plug ejector is included. |
| Item |
Part No. |
Specifications |
| Straight shank for Tile holesaws |
SLSKT |
Straight shank 10mm (3/8") |
| SDS shank for Tile holesaws |
SLSKTR |
SDS shank (Light-weight hammer drill) |
|
| * |
The plug ejector is included. |
| Item |
Part No. |
Specifications |
| Replacement Shank |
SLADPJDE |
Replacement shank for SLSKJDE
(DIN 3126,ISO1173 Style E6.3) |
|
Dust collecting cover
|
| Item |
Part No. |
Specifications |
Dust collecting cover set 145
for S-LOCK series
(Plastic cover + holder adaptor) |
SLSJCH145ST |
Usable for a cutter of S-LOCK
50mm to 125mm in diameter
(inner diameter of plastic cover is 145mm) |
Dust collecting cover set 170
for S-LOCK series
(Plastic cover + holder adaptor) |
SLSJCH170ST |
Usable for a cutter of S-LOCK
50mm to 150mm in diameter
(inner diameter of plastic cover is 170mm) |
| Plastic cover 145 |
SLSJC145 |
Usable for a cutter of S-LOCK
50mm to 125mm in diameter |
| Plastic cover 170 |
SLSJC170 |
Usable for a cutter of S-LOCK
50mm to 150mm in diameter |
| Holder adaptor |
SLSJCH |
Use with S-LOCK arbors |
|
| Item |
Part No. |
Specifications |
| HSS center drill |
SLCD |
|
| HSS center drill 80 |
SLCD80 |
Holesaw 578 |
| Carbide center drill |
SLCDT |
|
| Carbide center drill 80 |
SLCDT80 |
Holesaw 578P |
|
| Item |
Part No. |
Application |
| Center pin |
SLCP |
Tile holesaws |
|
| Item |
Part No. |
Application |
| Plug ejector |
SLPE |
Removal of dust |
|
| Item |
Part No. |
Cutter sizes |
| Cutter adaptor 30 |
SLADP30 |
30mm (1-3/16") or less |
| Cutter adaptor 38 |
SLADP38 |
31mm to 49mm (1-1/4" to 15/16") |
| Cutter adaptor 130 |
SLADP130 |
50mm to 130mm (2" to 5-1/8") |
|
- The shank for cordless drill must be used with a cordless drill. Use with an impact drill may cause troubles, e.g. rapid wear or chipping of the cutting teeth, falling of the cutter, and breakage of the shank.
|
